ULTRASONIC SENSOR REMOVAL/INSTALLATION

id092200775600

Caution

•  Do not use a ultrasonic sensor that has fallen off.

1.  Disconnect the negative battery cable.

2.  Remove the rear bumper. (See REAR BUMPER REMOVAL/INSTALLATION.)

3.  Disconnect the connector.

am6zzw00000437

4.  Pull the retainer as shown in the figure.

am3zzw00006157

5.  Remove the ultrasonic sensor from the rear bumper.

am3zzw00006158

6.  Install in the reverse order of removal.