FRONT BUMPER BRACKET INSTALLATION [PANEL REPLACEMENT]

id098008743200

Symbol Mark

am3uub00000093

Installation Procedure

LH

1.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2.  After temporarily installing new parts, make sure the related parts fit properly.

3.  Continuous CO² arc weld the 6 locations indicated by (A) shown in the figure while install the front bumper bracket.

am3uub00000094

RH

1.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2.  After temporarily installing new parts, make sure the related parts fit properly.

3.  Continuous CO² arc weld the 6 locations indicated by (A) shown in the figure while install the front bumper bracket.

am3uub00000245