DIAGNOSTIC MONITORING TEST RESULTS [LF ATX (FN4A-EL), L3 ATX]

id0102b6801400

•  The purpose of this test mode is to confirm the result of OBD-II monitor diagnostic test results. The result values stored when particular monitor is completed are displayed. If the monitor is not completed, initial value is displayed.

TEST ID

Description

Related system
10:01:80
A/F sensor lean-to-rich response (calculated)
A/F sensor
10:01:81
A/F sensor rich-to-lean response (calculated)
10:21:80
A/F sensor and HO2S switching time ratio
Catalyst
10:A2:0B
Cylinder No.1 average misfire counts for last 10 DC
Misfire
10:A2:0C
Cylinder No.1 misfire counts for last/current DC
10:A3:0B
Cylinder No.2 average misfire counts for last 10 DC
10:A3:0C
Cylinder No.2 misfire counts for last/current DC
10:A4:0B
Cylinder No.3 average misfire counts for last 10 DC
10:A4:0C
Cylinder No.3 misfire counts for last/current DC
10:A5:0B
Cylinder No.4 average misfire counts for last 10 DC
10:A5:0C
Cylinder No.4 misfire counts for last/current DC