CRANKSHAFT, MAIN BEARING CONSTRUCTION[ZJ, ZY, Z6]
id0110b1100800
• A cast iron, five-bearing, four-counter weight crankshaft has been adopted for correction of crankshaft related balance.
• An oil line for supplying oil to each journal is provided in the crankshaft.
• Crank pins and fillets on both sides of the journal are rolled to bear heavy loads.
|
1
|
Fillet roll area
|
|
2
|
Oil passage
|
• Upper and lower main bearings are made of aluminum alloy. The upper main bearing has oil grooves and an oil hole.
• There is no upper and lower bearings positioning tab for installing the main journal.
• Measure and attach the main bearings (upper and lower) so that they are positioned at the center of the main bearing cap.
|
1
|
Thrust bearing
|
|
2
|
Upper main bearing
|
|
3
|
Front
|
|
4
|
Lower main bearing
|
|
5
|
Upper main bearing oil groove
|
|
6
|
Oil hole
|
|
7
|
Main bearing journal
|
|
8
|
Main bearing
|
|
9
|
Specified measurement
|
• The main bearing can be selected from three types including standard, 0.25 mm {0.01 in} oversize, and 0.50 mm {0.02 in} oversize.
