FRONT OIL SEAL REPLACEMENT[ZJ, ZY, Z6]

id0110b1800800

1. Remove the battery cover.

2. Disconnect the negative battery cable.

4. Remove in the order indicated in the table.

5. Install in the reverse order of removal.

am3zzw00002298

Crankshaft Pulley Installation Bolt Removal Note

1. Fix the crankshaft pulley using the SSTs.

2. Remove the crankshaft pulley installation bolt.

am3zzw00002299

Front Oil Seal Removal Note

1. Remove the oil seal lip using a cutting knife.

2. Remove the oil seal using a flathead screwdriver with the tip protected by a rag to prevent crankshaft oil seal damage.

am3zzw00002300

Front Oil Seal Installation Note

1. Apply clean engine oil to the new front oil seal.

2. Insert the front oil seal into the engine front cover by hand.

3. Tap the front oil seal in using the SST and a hammer.

am3zzw00002301

am3zzw00002302

Pushing distance of the front oil seal

0—0.5 mm {0—0.019 in}

Crankshaft Pulley Installation Bolt Installation Note

1. Fix the crankshaft pulley using the SSTs.

2. Tighten the crankshaft pulley installation bolt.

am3zzw00002299

Tightening torque

157—167 N·m {16.1—17.0 kgf·m, 116—123 ft·lbf}

1	Crankshaft pulley installation bolt (See Crankshaft Pulley Installation Bolt Removal Note) (See Crankshaft Pulley Installation Bolt Installation Note)
2	Crankshaft pulley
3	Front oil seal (See Front Oil Seal Removal Note) (See Front Oil Seal Installation Note)