PISTON CONSTRUCTION[MZ-CD 1.6 (Y6)]


id0110b2119600

•  The pistons are made of light metal alloy and each has a recess machined centrally in the crown.
•  Four valve pockets are worked into each piston crown.
•  The pistons are available in four different weight classes.
•  The arrow (1) on the piston crown indicates the correct orientation for installation, and it must point towards the timing end of the engine when the pistons are installed.
•  The piston pin is a floating fit and is held in position by two snap rings.
b3e0110t209

1
Arrow marking indicating correct installation orientation
2
Weight classification marking