FRONT OIL SEAL REPLACEMENT[MZ-CD 1.6 (Y6)]

id0110b2800800

Note

• In order to perform the work the vehicle lifted, first install the No.3 engine mount bracket and No.3 engine mount rubber.

1. Remove the timing belt.

2. Remove in the order indicated in the table.

3. Install in the reverse order of removal.

am3zzw00001386

Front Oil Seal Removal Note

Note

• In order to perform the work with the vehicle lifted, first install the No.3 engine mount bracket and No.3 engine mount rubber.

1. Install the No.3 engine mount bracket.

Tightening torque

55 N·m {5.6 kgf·m, 41 ft·lbf}

2. Install the No.3 engine mount rubber.

Tightening torque

nut: 74.5—104.9 N·m {7.6—10.6 kgf·m, 55.0—76.6 ft·lbf}

bolt: 74.5—93.1 N·m {7.60—9.49 kgf·m, 55.0—68.6 ft·lbf}

3. Remove the engine jack and attachment.

am3zzw00001387

4. Remove the front oil seal using a flathead screwdriver with the tip protected by a rag to prevent crankshaft oil seal damage.

Front Oil Seal Installation Note

Note

• A new front oil seal is supplied with an alignment and protection sleeve that will be pushed out during installation.

1. Apply clean engine oil to a new front oil seal.

2. Install the front oil seal using the SST.

am3zzw00001388

3. Secure the engine and the transaxle using an engine jack and attachment.

am3zzw00001387

4. Remove the No.3 engine mount bracket and No.3 engine mount rubber.

1	Key
2	Front oil seal (See Front Oil Seal Removal Note Front Oil Seal Removal Note.) (See Front Oil Seal Installation Note.)