WATER PUMP REMOVAL/INSTALLATION[MZ-CD 1.6 (Y6)]

id0112c3800700

Warning

•  Remove and install all parts when the engine is cold, otherwise they can cause severe burns or serious injury.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION[MZ-CD 1.6 (Y6)].)

2.  Disconnect the negative battery cable.

3.  Remove the under cover.

4.  Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT[MZ-CD 1.6 (Y6)].)

5.  Remove the drive belt. (See DRIVE BELT REPLACEMENT[MZ-CD 1.6 (Y6)].)

6.  Remove the timing belt. (See TIMING BELT REMOVAL/INSTALLATION[MZ-CD 1.6 (Y6)].)

7.  Remove in the order indicated in the table.

am3zzw00001423

1	Water pump (See Water Pump Installation Note)
2	O-ring

8.  Install in the reverse order of removal.

9.  Add engine coolant. (See ENGINE COOLANT REPLACEMENT[MZ-CD 1.6 (Y6)].)

10.  Inspect for engine coolant leakage. (See ENGINE COOLANT LEAKAGE INSPECTION[MZ-CD 1.6 (Y6)].)

Water Pump Installation Note

1.  Tighten the bolts in 2 stages in the order as shown in the figure.

am3zzw00001424