ACCELERATOR CABLE INSPECTION/ADJUSTMENT[ZJ, ZY, Z6]

id0113b1805300

Without Throttle Valve Actuator Only

1. Verify that the throttle valve is fully closed.

2. Move the accelerator cable in the directions of A and B, and verify that the accelerator cable play is within the specification.

am3zzw00002362

• If not within the specification, adjust the cable play using locknut C.

Standard

1.0—3.0 mm {0.04—0.11 in}

Tightening torque

9.8—14.7 N·m {100—149 kgf·cm, 86.8—130 in·lbf}