FUEL FILTER (HIGH-PRESSURE) REMOVAL/INSTALLATION[LF, L3]

id0114c2803000

Warning

•  Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the “Fuel Line Safety Procedure”, while referring to “BEFORE SERVICE PRECAUTION”.

•  Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, before performing the fuel pump unit removal/installation, always complete the “Fuel Leak Inspection After Fuel Pump Unit Installation”.

1.  Follow “BEFORE SERVICE PRECAUTION” before performing any work operations to prevent fuel from spilling from the fuel system. (See BEFORE SERVICE PRECAUTION[LF, L3].)

2.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION[LF, L3].)

3.  Disconnect the negative battery cable.

4.  Remove the under cover.

5.  Remove the quick release connector from the fuel filter (high-pressure). (See QUICK RELEASE CONNECTOR REMOVAL/INSTALLATION[LF, L3].)

am3zzw00001818

6.  Remove the bracket bolt.

7.  Remove the fuel filter (high-pressure).

8.  Install in the reverse order of removal.

9.  Inspect all related parts by performing “AFTER SERVICE PRECAUTION”. (See AFTER SERVICE PRECAUTION[LF, L3].)