FUEL ADDITIVE TANK CONSTRUCTION[MZ-CD 1.6 (Y6)]
id0116c3151600
High Power-Euro 4
• The fuel additive tank is located behind the fuel tank and is attached to the rear crossmember. The fuel additive pump unit forms one complete component with the tank and is located in the fuel additive tank.
• The fuel additive pump unit and fuel additive tank can only be replaced as a single unit.
• The volume of the fuel additive tank is 1.8 L {0.48 US gal, 0.40 lmp gal} and is designed for a total driving distance of 60,000 km {37282.3 mile}. Fuel additive must therefore be topped off in accordance with the maintenance instructions.
• After filling the fuel additive tank, the fuel additive control module software must be reset. This can be done with the Mazda Modular Diagnostic System (M-MDS), or manually with the fuel-filler switch if no DTC is present.
|
1
|
Fuel additive hose
|
|
2
|
Overflow pipe (cap)
|
|
3
|
Filler pipe (cap)
|
|
4
|
Fuel additive tank
|
|
5
|
Fuel additive pump unit
|
|
6
|
Vent valve
|
|
7
|
To fuel tank
|
