GENERATOR DISASSEMBLY/ASSEMBLY[ZJ, ZY, Z6]

id0117c1800400

Caution

•  Melt the solder quickly, otherwise the diodes (rectifier) and regulator will be damaged by excessive heat.

Without Throttle Valve Actuator

1.  Disassemble in the order indicated in the table.

2.  Assemble in the reverse order of disassembly.

am3zzw00001345

1	Rotar assembly
2	Stator assembly
3	Pulley
4	Rotor
5	Front bearing
6	Rear bearing
7	Front cover
8	Stator coil
9	Rectifier
10	Brush holder (built‐in power transistor)
11	Rear cover
12	Terminal B component

With Throttle Valve Actuator

1.  Disassemble in the order indicated in the table.

2.  Assemble in the reverse order of disassembly.

am3zzw00003609

1	Rotar assembly
2	Stator assembly
3	Pulley (See Without Throttle Valve Actuator.)
4	Rotor
5	Front bearing
6	Rear bearing
7	Front cover
8	Stator coil
9	Rectifier
10	Brush holder (built‐in power transistor)
11	Rear cover
12	Terminal B component

Pulley Disassembly/Assembly Note

1.  Disassemble/assemble the pulley using the SST.

am3zzw00003543