BATTERY RECHARGING [ZJ, ZY, Z6]
id0117c1800700
-
Warning
-
• Keep all flames away from the battery, otherwise evaporated gas from the battery fluid may catch fire, and cause serious injury.
• Remove the battery filler caps when recharging to prevent battery deformation or damage (if equipped).
-
Caution
-
• Do not quick charge for over 30 min. It will damage the battery.
1. Remove the battery filler caps (if equipped).
2. Remove the battery and then place it in a pan of water.
3. Connect a battery charger to the battery and adjust the charging current as follows.
-
Battery slow charge current [ZJ, ZY]
-
50D20L (40 A·h/5HR): 4.0—5.0 A
75D23L (52 A·h/5HR): 5.0—6.0 A
-
Battery slow charge current [Z6]
-
50D20L (40 A·h/5HR, 45 A·h/20HR): 4.0—5.0 A
50D20L (40 A·h/5HR, 50 A·h/20HR): 4.0—5.0 A
75D23L (52 A·h/5HR, 65 A·h/20HR): 5.0—6.0 A
80D26L (55 A·h/5HR): 5.5—6.5 A
-
Battery quick charge current (30 min.) [ZJ, ZY]
-
50D20L (40 A·h/5HR): 25 A
75D23L (52 A·h/5HR): 35 A
-
Battery quick charge current (30 min.) [Z6]
-
50D20L (40 A·h/5HR, 45 A·h/20HR): 25 A
50D20L (40 A·h/5HR, 50 A·h/20HR): 25 A
75D23L (52 A·h/5HR, 65 A·h/20HR): 35 A
80D26L (55 A·h/5HR): 35 A
4. After the battery is recharged, verify that the voltage is within the specification and remains at the same value for 1 h or more after the recharging was completed.
-
• If not within the specification, replace the battery.
-
Standard voltage
-
12.4 V or more
