PCM CONFIGURATION[LF, L3]

id0140a9802600

1.  Connect the M-MDS to DLC-2.

am3zzw00000466

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select the “Module Programming”.

•  When using the PDS (Pocket PC)

1.  Select “Programming”.

2.  Select “Module Programming”.

3.  Then, select the “Programmable Module Installation” and “PCM” from the screen menu.

4.  Select “Programmable Parameters”. [with DSC HU/CM]

5.  Select “Tire Size / Axle Ratio”. [with DSC HU/CM]

6.  Select “Body Type - (PCM)”, then select the applicable body type on the M-MDS screen. [with DSC HU/CM]

7.  Retrieve DTCs using the M-MDS, then verify if DTCs are present.

•  If a DTC is present, perform the applicable DTC inspection.