KNOCK SENSOR (KS) REMOVAL/INSTALLATION[LF, L3]

id0140a9802900

1.  Remove the following part for easier access.

•  Intake manifold (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION[LF, L3].)

2.  Disconnect the KS connector.

3.  Remove the KS installation bolt, then remove the KS.

am3zzw00002374

4.  Install in the reverse order of removal.

Tightening torque
16—24 N·m {1.7—2.4 kgf·m, 12—17 ft·lbf}