ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR FUNCTION[ABS, DYNAMIC STABILITY CONTROL (DSC)]

id0402b1100900

•  The PID/data monitor function is used for optionally selecting input/output signal monitor items preset in the ABS HU/CM or DSC HU/CM and reading them out in real-time.

PID/DATA Monitor Table (Vehicles with ABS)

Mazda Modular Diagnostic System (M-MDS) display

Input/output part name

Unit/Operation

(Mazda Modular Diagnostic System (M-MDS) display)
CCNTABS
DTC (amount detected)
―
LF_WSPD
ABS wheel-speed sensor (LF)
KPH, MPH
RF_WSPD
ABS wheel-speed sensor (RF)
KPH, MPH
LR_WSPD
ABS wheel-speed sensor (LR)
KPH, MPH
RR_WSPD
ABS wheel-speed sensor (RR)
KPH, MPH
BOO_ABS
Brake switch
On/Off


PID/DATA Monitor Table (Vehicles with DSC)

Mazda Modular Diagnostic System (M-MDS) display

Input/output part name

Unit/Operation

(Mazda Modular Diagnostic System (M-MDS) display)
CCNTABS
DTC (amount detected)
―
MPRETDR
Brake fluid pressure sensor
Pa
SWA_POS
Steering angle sensor
°
ESP_VOLT
IVD/DSC sensor supply voltage
V
YAW_RATE
Combined sensor (yaw rate value)
°/s
LAT_ACCL
Combined sensor (lateral-G sensor)
G
LF_WSPD
ABS wheel-speed sensor (LF)
KPH, MPH
RF_WSPD
ABS wheel-speed sensor (RF)
KPH, MPH
LR_WSPD
ABS wheel-speed sensor (LR)
KPH, MPH
RR_WSPD
ABS wheel-speed sensor (RR)
KPH, MPH
BOO_ABS
Brake switch
On/Off
TCYC_SW
DSC OFF switch
Depressed/Not Depressed
TCYC_FS
DSC HU/CM
On/Off