TRANSAXLE OIL INSPECTION [A26M-R]

id0515l1800000

1.  Park the vehicle on level ground.

2.  Remove the under cover.

3.  Remove the oil level plug and washer.

aaxjjw00001389

4.  Verify that the oil is near the brim of the plug port.

•  If the oil level is low, add the specified amount and type of oil through the filler plug hole.

Item

Type A*1

Type B*2
Manual transaxle oil grade
API service GL-4 or GL-5
API service GL-4
Manual transaxle oil viscosity
All-season: SAE 75W-90
Above 10 °C {50 °F}: SAE 75W-90
SAE 75W-80

*1: Applied VIN (assumed)

*2: Applied VIN (assumed)
JM0 BK103200 300001—JM0 BK103200 463891
JM0 BK103200 463892—
JM0 BK10R200 300001—JM0 BK10R200 463891
JM0 BK10R200 463892—
JMZ BK12R6*# 500001—JMZ BK12R6*# 828321
JMZ BK12R6*# 828322—
JMZ BK14L6*# 500001—JMZ BK14L6*# 828321
JMZ BK14L6*# 828322—
JMZ BK14L60# 500001—JMZ BK14L60# 828321
JMZ BK14L60# 828322—
JMZ BK14R6*# 500001—JMZ BK14R6*# 828321
JMZ BK14R6*# 828322—
JMZ BK14R60# 500001—JMZ BK14R60# 828321
JMZ BK14R60# 828322—

5.  Tighten the oil level plug with a new washer.

Tightening torque
27.5—50.9 N·m {2.8—5.1 kgf·m, 37.5—20.2 ft·lbf}

6.  Install the under cover.