ON-BOARD DIAGNOSTIC SYSTEM EXTERNAL TESTER COMMUNICATION FUNCTION[ELECTRO HYDRAULIC POWER ASSIST STEERING (EHPAS)]


id0602b1101300


Outline

•  The external tester communication function enables communication of diagnostic data (DTC read-outs, input/output signal read-outs) between the EHPAS control module and an external tester.

Connections/Communication Contents

External tester

Mazda Modular Diagnostic System (M-MDS)

Connection

Communication method

On-board diagnostic (malfunction detection) function
Input/output: CAN_H (HS), CAN_L (HS)
Serial communication
PID/DATA monitor function
Input/output: CAN_H (HS), CAN_L (HS)
Serial communication


Serial communication

•  Serial communication (two-way communication) allows for multiple data to be sent and received instantly along the same line.
•  By connecting the Mazda Modular Diagnostic System (M-MDS) to the DLC-2, diagnostic data can be sent and received between the Mazda Modular Diagnostic System (M-MDS) and the EHPAS control module via CAN lines.
•  The EHPAS control module receives the command signals of the malfunction detection function and PID/data monitor function from the Mazda Modular Diagnostic System (M-MDS), and sends DTCs and data regarding the operating status of each input/output part to the Mazda Modular Diagnostic System (M-MDS).
am3zzn00000675

Diagnostic function name

Signal received

Signal sent

Malfunction detection function
DTC verification signal
Diagnostic trouble code
PID/DATA monitor function
Command signal to read selected monitor item
Monitored data for requested monitor item