CLEARING DTC

id070200801600

1.  Connect the M-MDS to the DLC-2 connector.

am3zzw00000457

2.  Shine a 60 W incandescent light from a distance of approx. 100 mm {3.9 in}directly onto the solar radiation sensor.

Note

•  If incandescent light is not shone on the solar radiation sensor, the climate control unit determines a malfunction and indicates DTC “B1260, B1261”.

3.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

•  When using the IDS (laptop PC)

―  Select the “Toolbox” tab.

―  Select the “Self Test”.

―  Select the “Modules”.

―  Select the “EATC”.

•  When using the PDS (Pocket PC)

―  Select “Module Tests”.

―  Select the “Optional” tab.

―  Select the “EATC”.

―  Select the “Self Test”.

4.  Verify the DTC according to the directions on the screen.

5.  Press the clear button on the DTC screen to clear the DTC.

6.  Verify that no DTCs are displayed.