DTC B1317
Input voltage high
DETECTION CONDITION
• Voltage detected at water heater unit terminals E is more than 16 V.
POSSIBLE CAUSE
• Short to power circuit between the generator and PCM
• Generator malfunction
• Battery malfunction
DTC B1317 [WATER HEATER SYSTEM]
id070228815400
|
DTC B1317 |
Input voltage high |
|---|---|
|
DETECTION CONDITION
|
• Voltage detected at water heater unit terminals E is more than 16 V.
|
|
POSSIBLE CAUSE
|
• Short to power circuit between the generator and PCM
• Generator malfunction
• Battery malfunction
|
|
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
INSPECT BATTERY VOLTAGE
• Measure battery voltage.
• Is voltage less than 16 V?
|
Yes
|
Go to the next step.
|
|
No
|
Inspect charging system.
|
||
|
2
|
INSPECT WATER HEATER UNIT
• Clear the DTC. (See CLEARING DTC [WATER HEATER SYSTEM].)
• Perform the KOEO Self Test. (See DTC DISPLAY [WATER HEATER SYSTEM].)
• Is the same DTC present?
|
Yes
|
Replace the water heater unit.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY AFTER REPAIR PROCEDURE
• Perform the after repair procedure. (See CLEARING DTC [WATER HEATER SYSTEM].)
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC troubleshooting.
|
|
No
|
Troubleshooting completed.
|
||