AIRFLOW MODE ACTUATOR REMOVAL/INSTALLATION

id074000801600

1.  Disconnect the negative battery cable.

2.  Remove the glove compartment. (R.H.D.) (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

3.  Remove the PJB and PJB bracket. (R.H.D.) (See PASSENGER JUNCTION BOX (PJB) REMOVAL/INSTALLATION.)

4.  Remove the airflow mode rod from the airflow mode actuator.

5.  Remove in the order indicated in the table.

am3zzw00000784

1	Airflow mode actuator connector
2	Airflow mode actuator

6.  Install in the reverse order of removal.