PTC (POSITIVE TEMPERATURE COEFFICIENT) HEATER INSPECTION[MZ-CD 1.6 (Y6)]

id0740b3806800

1.  Allow the engine to cool down completely.

2.  Remove the ambient temperature sensor and apply a resistance of approox.12 kilohms (equivalent to -10 °C {-14.0 °F}).

3.  Connect the PTC heater power supply wiring harness (red) or ground wiring harness (black) to a tester.

4.  Set the fan switch at MAX HI and the temperature setting dial at MAX HOT, start the engine, and then measure the current.

•  If not within specification, remove the PTC heater.

Current value (approx. quantity)

67.5—82.5 A