DTC DISPLAY

id080200800400

1.  Connect the M-MDS to the DLC-2 connector.

am3zzw00001092

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

•  When using the IDS (laptop PC)

―  Select the “Toolbox” tab.

―  Select “Self Test”.

―  Select “Modules”.

―  Select “RCM”.

•  When using the PDS (Pocket PC)

―  Select “Module Tests”.

―  Select “RCM”.

―  Select “Self Test”.

3.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

4.  After completion of repairs, clear all DTCs stored in the SAS control module. (See CLEARING DTC.)