DTC INSPECTION[INSTRUMENT CLUSTER]

id0902e8800200

1.  Connect the M-MDS to the DLC-2.

am3zzw00001927

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

When using the IDS (laptop PC)

•  Select the “Toolbox” tab.

•  Select “Self Test”.

•  Select “Modules”.

•  Select “IC”.

When using the PDS (Pocket PC)

•  Select “Module Tests”.

•  Select “IC”.

•  Select “Self Test”.

3.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

4.  After completion of repairs, clear all DTCs stored in the instrument cluster.