No.3 ALL POWER WINDOWS OTHER THAN DRIVER'S SIDE DO NOT OPERATE USING THE POWER WINDOW SUBSWITCH[POWER WINDOW SYSTEM (WITHOUT EXTERIOR OPEN/CLOSE FUNCTION)]
id090396831200
|
3
|
All power windows other than driver’s side do not operate using the power window subswitch.
|
|
POSSIBLE CAUSE
|
• Open or short circuit in power window subswitch wiring harness (battery power supply circuit).
• Power window subswitch malfunction
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
• Turn the ignition switch to the ON position.
• Set the power cut-switch to the UNLOCK position.
• Measure the voltage at the power window subswitch terminal B.
• Is the voltage B+?
|
Yes
|
Replace the power window subswitch. (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION.)
|
|
No
|
Inspect for an open or short circuit in the wiring harness between the power window main switch and the power window subswitch.
Inspect the power window subswitch connector connection. (damage/pulled-out pins, corrosion)
Repair or replace if necessary.
|
||