NO.2 CASSETTE TAPE PLAYER DOES NOT EJECT THE CASSETTE TAPE[CASSETTE TAPE PLAYER]

id0903e4805100

2

Cassette tape player does not eject the cassette tape/Possible DTC: 00:Er01, 00:Er04, 00:Er10
Troubleshooting hints
•  Cassette tape is malfunctioning.
•  Cassette tape player is malfunctioning.
•  Cassette patch is broken.
•  Poor installation of cassette patch.
Note
•  The cassette tape player may not eject the cassette tape due to tape slack, peel-off or adhered seal.

Diagnostic procedure

STEP

INSPECTION

ACTION
1
•  Press the eject button on the player.
•  Is a “TAPE OUT” message displayed?
Yes
Go to the next step.
No
Replace the cassette patch.
2
•  Visually inspect the dust cover on the cassette patch.
•  Is there any damage on the cover?
Yes
Replace the cassette patch.
No
Go to the next step.
3
•  Inspect the cassette patch installation.
•  Is the cassette patch installed securely?
Note
•  Inspect the connector for poor connection (such as damaged/bent/pulled-out pins, corrosion).
Yes
Replace the cassette tape player.
Note
•  When replacing the cassette tape player, inspect the following:
―  Label is not peeling off
―  Cassette patch is normal
No
Install the cassette patch securely.
If the cassette patch is broken, replace the cassette patch.