REFERENCE INFORMATION[CAR-NAVIGATION SYSTEM]

id0903e8802600

Starting Procedure for Diagnostic Function

1. Turn the ignition switch to the ACC or ON position.

2. Press the MENU button.

3. Select “Navigation Set Up”.

4. Select “Calibration”.

5. Select “Map Version”.

6. Press the joystick up two times, then down two times.

7. “Diagnosis Check” is displayed on the screen.

8. Select the “Diagnosis Check”.

d3e903fw8s02

No.

Display item

Description

1

REV

Indicate Reverse signal state.

•  ON: Reverse

•  OFF: Others

2

Microphone

Indicate the connection state of a microphone.

•  OK: Connect

•  NCON: Disconnect

3

Speed^*

Indicate the present vehicle speed by kph/mph (a maximum of 3 digits).

4

TNS^*

Indicate TNS signal state.

•  ON: Turn TNS ON

•  OFF: Turn TNS OFF

5

GPS Antenna^*

Indicate the connection state of a GPS antenna.

•  OK: Connect

•  NCON: Disconnect

6

Traffic System

Indicate the RDS-TMC system availability on the vehicle.

•  None: Not equip.

No.	Display item	Description
1	REV	Indicate Reverse signal state. • ON: Reverse • OFF: Others
2	Microphone	Indicate the connection state of a microphone. • OK: Connect • NCON: Disconnect
3	Speed^*	Indicate the present vehicle speed by kph/mph (a maximum of 3 digits).
4	TNS^*	Indicate TNS signal state. • ON: Turn TNS ON • OFF: Turn TNS OFF
5	GPS Antenna^*	Indicate the connection state of a GPS antenna. • OK: Connect • NCON: Disconnect
6	Traffic System	Indicate the RDS-TMC system availability on the vehicle. • None: Not equip.

* :It is used for symptom troubleshooting. (Troubleshooting index No. 5 and No. 8)

Finishing Procedure for Diagnostic Function

1. Turn the ignition switch to the LOCK position.

2. Turn the ignition switch to the ACC or ON position.

3. Return to the normal screen.