POWER WINDOW MOTOR INSPECTION

id091200800800

1.  Apply battery positive voltage and connect ground to power window motor terminals E and F, and then inspect the power window motor operation.

b3e0912wa05

•  If the power window motor does not operate as indicated in the table, replace it.

Operation	Terminal
	Front: F Rear: E	Front: E Rear: F
Open	GND	B+
Closed	B+	GND

2.  Connect battery positive voltage to power window motor terminal D and connect terminal C to ground.

3.  Operate the power window motor and measure the voltage at terminals A and B.

•  If there is any malfunction, replace the power window motor.