SECURITY LIGHT CONSTRUCTION/OPERATION[ADVANCED KEYLESS SYSTEM]
id0914b1105700
Construction
• Allows visual confirmation of immobilizer system operation.
• If any malfunction is detected in the immobilizer system, the malfunction location can be verified by the security light flashing pattern.
-
Note
-
• If there is security light system malfunction, DTCs may not be properly displayed. Always use the mazda modular diagnostic system (M-MDS) to verify DTCs.
Operation
• When the immobilizer system is operating, the security light flashes repeatedly
0.1 s every 2 s.
|
1
|
Illuminated
|
|
2
|
Goes out
|
|
3
|
Approx. 2 s
|
|
4
|
Approx. 0.1 s
|
• When the immobilizer system is released normally, the security light illuminates
for 3 s and then goes off when the ignition switch is turned to the ON position.
|
1
|
Illuminated
|
|
2
|
Goes out
|
|
3
|
Approx. 3 s
|
• If the immobilizer system is not released normally (malfunction detected by the malfunction diagnosis function), the security light displays a DTC. If this occurs, the security light flashes or illuminates for 1 min and then displays the DTC when the ignition switch is turned to the ON position.
-
― DTC 16 and lower: Flashes
― DTC 21 and higher: Illuminated
|
1
|
Examples: DTC 12 detected by the malfunction diagnosis function
|
|
2
|
Illuminated
|
|
3
|
Goes out
|
|
4
|
Approx. 1 min
|
|
5
|
DTC 12
|
-
Note
-
• The security light flashes to display the DTC 10 times.
• If multiple DTCs that can be confirmed with the security light are detected, only the DTC with the lowest number of those detected will be displayed by the security light.
