REAR DOOR TRIM REMOVAL/INSTALLATION

id091700802600

1.  Disconnect the negative battery cable. (vehicle with power window system)

2.  Using a small flathead screwdriver, open the cap and remove the screw, then remove the inner handle cover.

am3zzw00001944

3.  Remove the sail garnish. (5HB) (See SAIL GARNISH REMOVAL/INSTALLATION.)

4.  Remove the regulator handle. (vehicle without power window system) (See REGULATOR HANDLE REMOVAL.) (See REGULATOR HANDLE INSTALLATION.)

5.  Using a small flathead screwdriver, open the cap and remove the screw.

am3zzw00001945

6.  Detach clips A from the front door using a fastener remover.

7.  Pull the rear door trim upward and detach tabs B from the rear door.

8.  Disconnect the power window subswitch connector. (vehicle with power window system)

9.  Remove the rear door trim.

10.  Install in the reverse order of removal.