CENTER PANEL UNIT REMOVAL/INSTALLATION

id092000800600

1.  Disconnect the negative battery cable.

2.  Remove the decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

am3zzw00001389

1	Screw
2	Connector
3	Antenna feeder
4	Center panel unit (See Center Panel Unit Removal Note.)

4.  Install in the reverse order of removal.

Caution

•  When installing the center panel unit, make sure that the wiring harness and antenna feeder are not caught between the unit and dashboard.If the wiring harness or the antenna feeder is caught between the unit and dashboard, it may cause malfunctions.

Center Panel Unit Removal Note

1.  Pull the center panel unit outward, detach clip A from the dashboard, and then remove the center panel unit.

am3zzw00001390