STEERING LOCK UNIT INSPECTION

id092100800500

1.  Measure the voltage or inspect for continuity according to the Terminal Voltage Table (Reference).

•  If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under “Inspection item(s)” and related wiring harnesses.

2.  If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the steering look unit.

Terminal Voltage Table (Reference)

d6e921zw2502

Terminal	Signal name	Connected to	Measured condition	Voltage (V)/Continuity	Inspection item(s)
E	Push switch signal	Keyless control module	Start knob pressed	B+	•  Keyless control module •  Related wiring harnesses
			Start knob released	1.0 or less
F	Power supply	Fuse	Under any condition	B+	•  Fuse •  Related wiring harnesses
G	Key reminder switch signal	Keyless control module	Key inserted	B+	•  Keyless control module •  Related wiring harnesses
			Key removed	1.0 or less
I	Power supply	Fuse	Under any condition	B+	•  Fuse •  Related wiring harnesses
K	Serial communication	Keyless control module	Under any condition: Inspect for continuity to keyless control module.	Continuity detected	Related wiring harnesses
L	GND	Body ground	Under any condition: Inspect for continuity to GND.	Continuity detected	Related wiring harnesses