DATA MONITORING AND RECORDING PROCEDURE

id092200801500

1. Connect the M-MDS or equivalent to the DLC-2 (16-pin).

am3zzw00001929

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

When using the IDS (laptop PC)

• Select the “Toolbox” tab.

• Select “DataLogger”.

• Select “Modules”.

• Select “IC”.

When using the PDS (Pocket PC)

• Select “Module Tests”.

• Select “IC”.

• Select “DataLogger”.

3. Verify the data monitor items.

Indication Item Table

Monitor item

Input-output signal/part name

Unit/State

Terminal

CCNT_HE

Number of continuous DTCs

—

—

ECT_GAUGE

Water temperature gauge

°F

°C

1I, 1K

NUMKEYS^*

Number of key ID numbers registered with the vehicle

—

—

ODO COUNT

Odometer

m

1I, 1K

TACH

Tachometer

RPM

SPDOMETER

Speedometer

MPH

KPH

Monitor item	Input-output signal/part name	Unit/State	Terminal
CCNT_HE	Number of continuous DTCs	—	—
ECT_GAUGE	Water temperature gauge	°F	°C	1I, 1K
NUMKEYS^*	Number of key ID numbers registered with the vehicle	—	—
ODO COUNT	Odometer	m	1I, 1K
TACH	Tachometer	RPM
SPDOMETER	Speedometer	MPH	KPH

* :With immobilizer system (without advanced keyless system)