VENTILATOR GRILLE REMOVAL/INSTALLATION

id091700804600

Driver’s Side

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(2)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(3)  Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(4)  Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)

(5)  Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(6)  Dashboard center panel (See DASHBOARD CENTER PANEL REMOVAL/INSTALLATION.)

(7)  Meter hood (See METER HOOD REMOVAL/INSTALLATION.)

(8)  Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

(9)  Dashboard garnish (See DASHBOARD GARNISH REMOVAL/INSTALLATION.)

3.  Pull the driver-side ventilator grille outward and remove it.

4.  Remove the screw, then remove the driver-side demister grille.

am3zzw00002192

5.  Install in the reverse order of removal.

Passenger’s Side

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(2)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(3)  Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(4)  Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(5)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(6)  Dashboard center panel (See DASHBOARD CENTER PANEL REMOVAL/INSTALLATION.)

(7)  Dashboard garnish (See DASHBOARD GARNISH REMOVAL/INSTALLATION.)

3.  Pull the passenger-side ventilator grille outward and remove it.

4.  Remove the screw, then remove the passenger-side demister grille.

am3zzw00002193

5.  Install in the reverse order of removal.

Center

1.  Remove the decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION.)

2.  Remove the dashboard center panel. (See DASHBOARD CENTER PANEL REMOVAL/INSTALLATION.)

3.  Remove the screws, then remove the center ventilator grilles.

am3zzw00002194

4.  Install in the reverse order of removal.