INAPPROPRIATE OPERATION AND CONTROL RECORD 0x30 (TEMPERATURE RESTRICTION CONTROL) [PCM (SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5)]

id0102j3043000

Caution

The temperature restriction control is to prevent part damage. It is not a control which operates when a malfunction occurs Therefore, do not replace the part.

Outline

• If the driver continues to depress the accelerator pedal accidentally while asleep with the vehicle stopped and the engine running, the continuous high engine speed causes the temperature of the engine and exhaust system parts to increase. If the temperature of the engine and exhaust system parts increases, it may cause part damage.

To prevent this, the PCM performs the temperature restriction control when the following operation conditions are met.

Operation Conditions

Operation conditions

Determination conditions

•  When any of the following condition is met:

―  Engine coolant temperature continuously reaches high temperature range

―  Engine speed continuously reaches high engine speed range

* Determination period is extended as engine speed lowers

Preconditions

•  All of the following conditions are met:

―  Engine coolant temperature: 40 °C {104 °F} or more

―  While vehicle is stopped

―  Shift lever position is neutral (MTX)

―  Selector lever position is P or N position (ATX)

―  Accelerator pedal is depressed

Protection Control

• Limits the intake air amount.

Diagnosis Procedure and Explanation to Customer

Step

Inspection

Results

Action

1

PURPOSE: VERIFY CONDITION WHEN INAPPROPRIATE OPERATION AND CONTROL CODE 0x30 (TEMPERATURE RESTRICTION CONTROL) IS OPERATED

• Did the condition meet the operation conditions?

Yes

Explain to the customer that the vehicle is normal and the temperature restriction control was performed to protect the vehicle.

No

Go to the next step.

2

PURPOSE: VERIFY IF THERE IS ANY MALFUNCTION

• Has any DTC or pending code been recorded?

Yes

Repair the malfunctioning location according to the applicable DTC troubleshooting.

(See DTC TABLE [PCM (SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5)].)

No

DTC troubleshooting completed.

Step	Inspection	Results	Action
1	PURPOSE: VERIFY CONDITION WHEN INAPPROPRIATE OPERATION AND CONTROL CODE 0x30 (TEMPERATURE RESTRICTION CONTROL) IS OPERATED • Did the condition meet the operation conditions?	Yes	Explain to the customer that the vehicle is normal and the temperature restriction control was performed to protect the vehicle.
1		No	Go to the next step.
2	PURPOSE: VERIFY IF THERE IS ANY MALFUNCTION • Has any DTC or pending code been recorded?	Yes	Repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [PCM (SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5)].)
2		No	DTC troubleshooting completed.