ON-BOARD DIAGNOSTIC SYSTEM ACTIVE COMMAND MODES FUNCTION [PCM (SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5)]

id0102j3105400

• The simulation items are shown below.

Simulation item table

Item	Applicable component	Unit/Condition	Operation condition
ACCS	A/C relay	Off/On	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
AIRSHUT_DSD	Active air shutter	%	Note • If the active air shutter fully open/closed position learning is not completed, the active air shutter cannot be forcibly operated. When the active air shutter is forcibly operated, perform the active air shutter fully open/closed position learning. • Under the following conditions: ― Vehicle stopped ― Idling at P or N position ― Shutter fully open/closed position learning: completed
ARPMDES	Target engine speed	RPM	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
EVAPCP	Purge solenoid valve	%	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
FAN1	Cooling fan relay No.1	Off/On	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
FAN3	Cooling fan relay No.3	Off/On	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
FP	Fuel pump relay	Off/On	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
INJ_1	Fuel injector No.1	OFF	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
INJ_2	Fuel injector No.2	OFF	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
INJ_3	Fuel injector No.3	OFF	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
INJ_4	Fuel injector No.4	OFF	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
OIL_P_SOL	Engine oil solenoid valve	Off/On	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position
Test	Test mode	Off/On	• Under the following conditions: ― Vehicle stopped ― Idling at P or N position