GLOW PLUG CONTROL MODULE INSPECTION [SKYACTIV-D 1.5]

id0113q2705500

1.  Perform the KOEO self-test. (See KOEO/KOER SELF TEST [PCM (SKYACTIV-D 1.5)].)

2.  Verify that a glow control module related DTC is detected. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-D 1.5)].)

•  If DTCs are detected, repair the malfunctioning part according to the applicable DTC troubleshooting. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-D 1.5)].)

•  If a DTC is not detected, go to the next step.

3.  Inspect the following items:

•  Glow control module damage

•  Glow control module connector damage or corrosion

―  If there is any malfunction, repair or replace the malfunctioning part.

―  If there is no malfunction, replace the glow control module. (See GLOW PLUG CONTROL MODULE REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)