NEUTRAL SWITCH INSPECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5]


id0140g5800800


SKYACTIV-G 1.5


Neutral switch No.1

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

2.  Remove the neutral switch No.1. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [F66M-R].)

3.  Inspect for continuity between neutral switch No.1 terminals A and D.

am3zzw00018951

•  If not as specified, replace the neutral switch No.1. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [F66M-R].)

Specification

Measured condition

Continuity

Rod pushed
Continuity detected
Rod not pushed
No continuity


Neutral switch No.2 (with i-stop system)

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

2.  Remove the neutral switch No.2. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [F66M-R].)

3.  Inspect for continuity between neutral switch No.2 terminal A and D.

am6zzw00008558

•  If not as specified, replace the neutral switch No.2. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [F66M-R].)

Specification

Measured condition

Continuity

Rod pushed
Continuity detected
Rod not pushed
No continuity


SKYACTIV-G 2.0, SKYACTIV-G 2.5


Neutral switch No.1

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

2.  Remove the neutral switch No.1. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [C66M-R].)

3.  Inspect for continuity between neutral switch No.1 terminals A and B.

am3zzw00019577

•  If not as specified, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [C66M-R].)

Specification

Measured condition

Continuity

Rod pushed
Continuity detected
Rod not pushed
No continuity


Neutral switch No.2 (Back-up light switch) (with i-stop system)

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

2.  Remove the back-up light switch. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [C66M-R].)

3.  Inspect for continuity between neutral switch No.2 terminal B and C.

am6zzw00008558

•  If not as specified, replace the back-up light switch. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [C66M-R].)

Specification

Measured condition

Continuity

Rod pushed
Continuity detected
Rod not pushed
No continuity