GLOW INDICATOR LIGHT [SKYACTIV-D 2.2]
id0140z7265300
Purpose, Function
• The glow indicator light warns the drivers that the engine cannot be started by preheating the glow plug.
Construction
• The glow indicator light is equipped in the instrument cluster.
• For vehicles with center display, a warning message in the center display is displayed when the glow indicator light is illuminated. For the message content and verification method, refer to the CENTER DISPLAY. (See
CENTER DISPLAY [WITH CENTER DISPLAY].)
Operation
• The glow indicator light illumination conditions are as follows:
Glow indicator light illumination conditions
-
― During preheating of glow plug before engine start when cold (during preheating timer operation)
― After ignition is switched ON (burnt out bulb check)
― During fuel injection learning (manual)
― Fuel injection learning (manual) is performed, however learning condition is not met
― During timing chain learning
Glow indicator light flashing conditions
-
― Fuel injection learning (manual) completed
― Fuel injection learning (manual) failed (continues to flash)
― Engine oil data reset completed
― Timing chain learning completed
• The PCM sends a glow indicator light illumination request to the instrument cluster via CAN communication.
