WHEEL HUB, STEERING KNUCKLE INSPECTION

id031100800300

Wheel Bearing Excessive Play Inspection

1. Remove the wheel and tire. (See WHEEL AND TIRE REMOVAL/INSTALLATION.)

2. Remove the brake caliper component and disc plate. (See WHEEL HUB, STEERING KNUCKLE REMOVAL/INSTALLATION.)

3. Install the magnetic base and dial gauge as shown in the figure and measure the wheel bearing axial excessive play.

am3uuw00009908

Front wheel bearing maximum play

0.05 mm {0.002 in}

• If it exceeds the maximum specification, replace the wheel hub bearing. (See WHEEL HUB, STEERING KNUCKLE REMOVAL/INSTALLATION.)