DTC B11D4:08 [DYNAMIC STABILITY CONTROL (DSC)]
id0402b2894100
|
DTC
|
B11D4:08
|
Forward sensing camera (FSC)
|
|
|
DETECTION CONDITION
|
• Correct signal cannot be received from forward sensing camera (FSC).
• DSC HU/CM received excessively-continuous signal from forward sensing camera (FSC).
|
||
|
FAIL-SAFE FUNCTION
|
• Illuminates the Smart Brake Support/Smart City Brake Support (SBS/SCBS) indicator light (amber).
• Inhibits the Smart City Brake Support (SCBS) control.
|
||
|
POSSIBLE CAUSE
|
• Forward sensing camera (FSC) malfunction
• Brake fluid for restriction or leakage
|
||
|
SYSTEM WIRING DIAGRAM
|
Not applicable
|
||
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
PERFORM FORWARD SENSING CAMERA (FSC) DTC INSPECTION
• Switch the ignition off.
• Using the M-MDS, perform the DTC inspection for the forward sensing camera (FSC).
• Are any DTCs detected?
|
Yes
|
Go to applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY THAT THE SAME DTC IS NOT PRESENT
• Clear the DTCs from the memory.
• Are the same DTCs present?
|
Yes
|
Repeat the inspection from Step 1.
If the malfunction recurs, replace the forward sensing camera (FSC), then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY THAT NO OTHER DTCS ARE PRESENT
• Are any other DTCs output?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||