ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR FUNCTION [PCM (FN4A-EL)]
id0502q2280600
Function
PID/DATA Monitor Table
|
Item |
Definition |
Unit/Condition |
|---|---|---|
|
DGP_DIS_1
|
Traveled distance since DTC P1712:00 was last recorded
|
Km {mile}
|
|
DGP_DIS_2
|
Traveled distance since the maximum rotation speed difference occurred between the left and right drive wheels
|
Km {mile}
|
|
DGP_MAX_DIF
|
Maximum rotation speed difference between the left and right drive wheels
|
RPM
|
|
DGP_SPD
|
Vehicle speed with the trailing wheels at the time the maximum rotation speed difference between the left and right drive wheels occurred
|
KPH {MPH}
|
|
DWN SW
|
Down switch condition
|
On/Off
|
|
GEAR
|
Gear commanded by module
|
1st/2nd/3rd/4th
|
|
HTM_CNT
|
Number of high oil temperature mode (ATF temperature at 130 °C {266 °F} or more) operations
|
—
|
|
HTM_DIS
|
Travel distance after operation of high oil temperature mode (ATF temperature at 130 °C {266 °F} or more)
|
km {mile}
|
|
LINEDES
|
Target line pressure
|
Pa
|
|
LPS
|
Pressure control solenoid control signal in PCM
|
A
|
|
MNL SW
|
M position switch condition
|
On/Off
|
|
OSS
|
Output shaft speed
|
RPM
|
|
SSA/SS1
|
Shift solenoid A control signal in PCM
|
%
|
|
SSB/SS2
|
Shift solenoid B control signal in PCM
|
%
|
|
SSC/SS3
|
Shift solenoid C control signal in PCM
|
%
|
|
SSD/SS4
|
Shift solenoid D control signal in PCM
|
On/Off
|
|
SSE_SS5
|
Shift solenoid E control signal in PCM
|
On/Off
|
|
TFT
|
ATF temperature
|
°C {°F}
|
|
TFTV
|
Input voltage from TFT sensor
|
V
|
|
TR
|
Transaxle range position
|
P/R/N/D
|
|
TR_SENS
|
Input voltage from TR switch
|
V
|
|
TSS
|
Input shaft speed
|
RPM
|
|
UP SW
|
Up switch condition
|
On/Off
|