CLUTCH COVER INSPECTION [D66M-R]


id0510md157400

1.  Remove the manual transaxle. (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [D66M-R].)

2.  Using a vernier caliper, measure the depth of the diaphragm spring fingers.

ac5wzw00005669

Clutch cover diaphragm spring fingers maximum depth
0.6 mm {0.02 in}
•  If it exceeds the maximum depth, replace the clutch cover. (See CLUTCH UNIT REMOVAL/INSTALLATION [D66M-R].)

3.  Mount a dial indicator on the cylinder block.

4.  Using a dial indicator, measure the height difference of the diaphragm spring fingers while rotating the flywheel.

ac5wzw00005670

Clutch cover diaphragm spring fingers maximum height difference
0.8 mm {0.03 in}
•  If it exceeds the maximum height difference, replace the clutch cover. (See CLUTCH UNIT REMOVAL/INSTALLATION [D66M-R].)