AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [FN4A-EL]

id051701290900

Warning

•  A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until they are cool before changing the ATF.

1.  Drain the ATF.

(1)  Remove the oil dipstick.

(2)  Remove the front under cover No.2. (See FRONT UNDER COVER No.2 REMOVAL/INSTALLATION.)

(3)  Remove the drain plug and washer to drain the ATF into a container.

am3zzw00001199

2.  Add the ATF.

(1)  Install a new washer and the drain plug.

Tightening torque

30—41 N·m {3.1—4.1 kgf·m, 23—30 ft·lbf}

(2)  Add the specified ATF through the oil filler tube.

ATF Type	ATF Capacity (Reference)
ATF M-V	Draining ATF from drain plug: 2.5 L {2.6 US qt, 2.2 lmp qt} Overhauling transaxle: 4.5 L {4.8 US qt, 4.0 lmp qt}

3.  Install the oil dipstick.

4.  Inspect the ATF level. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [FN4A-EL].)