FRONT DOOR CHECKER REMOVAL/INSTALLATION
id091100520400
-
Caution
-
• When the front door checker securing bolts are removed, the front door may open until it contacts the front fender panel causing the front door and the front fender panel to be damaged. Before removing the front door, overlap and adhere the protective tape to the position shown in the figure and be careful not to damage the front door and the front fender panel.
1. Fully close the front door glass.
2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)
3. Remove the front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)
4. Remove the front door speaker (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION.)
5. Remove the bolt shown in the figure.
6. Remove the bolts shown in the figure.
7. Pull out the front door checker from the front door speaker installation hole.
8. Install in the reverse order of removal.
