MAZDA ERA-GLONASS SWITCH INSPECTION


id092200666700


Switch Inspection

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

2.  Remove the front map light. (See FRONT MAP LIGHT REMOVAL/INSTALLATION.)

3.  Verify that the continuity is as indicated in the table.

am3zzw00020426
am3zzw00020427

•  If not as indicated in the table, replace the mazda era-glonas switch. (See MAZDA ERA-GLONASS SWITCH REMOVAL/INSTALLATION.)


LED Illumination Inspection

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

2.  Remove the front map light. (See FRONT MAP LIGHT REMOVAL/INSTALLATION.)

3.  Apply battery voltage to mazda era-glonas switch terminal B, and connect terminal H to ground.

am6zzw00015430

•  If the LED does not illuminate, replace the mazda era-glonas switch. (See MAZDA ERA-GLONASS SWITCH REMOVAL/INSTALLATION.)


Indicator Light Illumination Inspection

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

2.  Remove the front map light. (See FRONT MAP LIGHT REMOVAL/INSTALLATION.)

3.  Apply battery positive voltage and connect the ground to the mazda era-glonas switch terminals and inspect the LED illuminates.

am3zzw00020426
am6zzw00015444

•  If the LED does not illuminate, replace the mazda era-glonas switch. (See MAZDA ERA-GLONASS SWITCH REMOVAL/INSTALLATION.)