COWL SIDE REINFORCEMENT REMOVAL [PANEL REPLACEMENT]

id098008741700

Symbol Mark

am6zzb00000329

Removal Procedure

1.  Drill the 20 locations indicated by (A) shown in the figure.

am3uub00000018

2.  Drill the 6 locations indicated by (B) shown in the figure.

Note

•  When drilling the 6 locations indicated by (B) shown in the figure, do not drill a hole all the way through or there could be a problem when installing the new part.

3.  Drill the 11 locations indicated by (C) shown in the figure, then remove the cowl side reinforcement.