CRANKSHAFT END PLAY INSPECTION/REPAIR [MZR-CD 2.2]


id0110f2502700

1.  Install the main bearing cap. (See CYLINDER BLOCK ASSEMBLY (I) [MZR-CD 2.2].)

2.  Measure the crankshaft end play.

•  If it exceeds the maximum specification, replace the thrust bearing or grind the crankshaft, and install an oversize bearing so that the specified end play is obtained.
belbze00000110
Crankshaft standard end play
0.040—0.282 mm {0.00158—0.01110 in}
Crankshaft maximum end play
0.30 mm {0.012 in}
Thrust bearing thickness
STD: 2.00—2.05 mm {0.0788—0.0807 in}
O.S. 0.35 mm {0.014 in}: 2.175—2.225 mm {0.08563—0.08759 in}

3.  Remove the main bearing cap. (See CYLINDER BLOCK DISASSEMBLY (II) [MZR-CD 2.2].)