SECONDARY SHAFT (NO.1) COMPONENTS PREINSPECTION
D6E051517040104
Thrust Clearance Inspection
1. Measure the thrust clearance of each gear using a feeler gauge and a dial gauge.
-
Secondary shaft (NO.1) gear thrust clearance
(mm {in})
|
Gear
|
Thrust clearance
|
|
1st
|
0.10-0.35 {0.0039-0.0138}
|
|
2nd
|
0.11-0.46 {0.0044-0.0181}
|
|
3rd
|
0.11-0.54 {0.0044-0.0212}
|
|
4th
|
0.10-0.65 {0.0039-0.0255}
|
-
• If not within the specification, replace the malfunctioning parts.
Radial Clearance Inspection
1. Measure the radial clearance of each gear using a dial gauge.
-
Secondary shaft (NO.1) gear radial clearance
(mm {in})
|
Gear
|
Radial clearance
|
|
1st
|
0.015-0.068 {0.00059-0.00267}
|
|
2nd
|
0.015-0.048 {0.00059-0.00188}
|
|
3rd
|
0.015-0.066 {0.00059-0.00259}
|
|
4th
|
0.015-0.066 {0.00059-0.00259}
|
-
• If not within the specification, replace the malfunctioning parts.