SECONDARY SHAFT (NO.2) COMPONENTS PREINSPECTION
D6E051517040108
Thrust Clearance Inspection
1. Measure the thrust clearance of each gear using a feeler gauge and a dial gauge.
-
Secondary shaft (NO.2) gear thrust clearance
(mm {in})
|
Gear
|
Thrust clearance
|
|
5th
|
0.10-0.55 {0.0039-0.0216}
|
|
6th
|
0.10-0.55 {0.0039-0.0216}
|
|
Reverse
|
0.11-0.34 {0.0043-0.0133}
|
-
• If not within the specification, replace the malfunctioning parts.
Radial Clearance Inspection
1. Measure the radial clearance of each gear using a dial gauge.
-
Secondary shaft (NO.2) gear radial clearance
(mm {in})
|
Gear
|
Radial clearance
|
|
5th
|
0.015-0.066 {0.00590-0.00259}
|
|
6th
|
0.015-0.066 {0.00590-0.00259}
|
|
Reverse
|
0.015-0.068 {0.00590-0.00267}
|
-
• If not within the specification, replace the malfunctioning parts.